What’s new.

Wednesday, September 23, 2026

1. this ship

   Heatmap lives on Air

   Walk heat and the Android installer sit on Air. Floors keeps hoverable plant pins and Place device — not a heat overlay.

   • ●Open Air for blooms and Install. Floors links there. Password hashes untouched.
   • floors
   • air
   • heatmap

2. this ship

   Heatmap walk: pick the floor, then tap start

   On Air, the floor chip is the story you survey. Open Walk, tap where you stand, tap the way you will walk, face that way, and Start walk so the pin follows that drawing.

   • ●Re-download Lantern.apk. Walk no longer auto-blooms from the middle of the pad.
   • ●Password hashes untouched. Frozen OG, rail lockup, and plant lists untouched.
   • air
   • heatmap
   • walk
   • android

3. this ship

   Heatmap and APs on Air; other pins stay on Floors

   Air is one 2D plan. After a heatmap walk, heat overlays that same drawing and AP dots stay visible through it. Hover or tap an AP for the card. Floors keeps PCs, data, cameras, and electrical as hoverable icons — no second heatmap plate.

   • ●Hard-refresh Air: heat paints on this plan, not a second floorplan. APs punch through the heat. Desktop hover and phone tap open the readable card.
   • ●Floors keeps the even columns and Clip / Make 2D next to Browse. Heatmap and AP pins live on Air. Password hashes untouched.
   • air
   • floors
   • heatmap
   • walk

4. this ship

   Heatmap overlays the one 2D floor plan

   Walk heat paints on the same drawing the shop already Places devices on. Floors does not ship a second heatmap-only building. Air uses that plate in heat mode with no Place or Browse chips.

   • ●Hard-refresh Floors: one plate. Clip and Make 2D sit with Browse. Walk samples color that drawing.
   • ●Air is the same map in heat mode — APs stay on top of the color. wifi-heatmap notes updated. Password hashes untouched.
   • floors
   • heatmap
   • walk
   • air

5. this ship

   Floors top columns even — Heatmap stays at the bottom

   Upload clip and Make 2D sit with Browse on the right 2D toolbar so the top columns hug even. Heatmap is still a labeled section at the bottom of Floors on the set 2D plan. iOS/Android walk stays under Add floor. It did not move to Air.

   • ●Hard-refresh Floors. Left: floor chips, Add floor, then the walk installer. Right: Browse, Walk sample, Place device, Upload clip, and Make 2D on one row, then the plate.
   • ●Scroll to Heatmap at the bottom. Heat paints on the PDF or Make 2D drawing already set above. No second Place bar. wifi-heatmap notes updated. video-floor-pdf stays in progress. Password hashes untouched.
   • floors
   • heatmap
   • walk

6. this ship

   Floors heatmap walk sits under Add floor

   The iOS/Android heatmap walk now lives under Add floor in the left column, so that empty space is used and the Floors page is shorter. Place device stays on the 2D plate.

   • ●Add floor, then Download Lantern.apk / Open Walk and this floor’s samples. The left column hugs that content instead of stretching into a blank void.
   • ●No second installer under the plan. wifi-heatmap notes updated. Second Floor plates were not redrawn. Password hashes untouched.
   • floors
   • heatmap
   • walk

7. this ship

   Heatmap sits at the bottom of Floors, heat-only

   Floors has one Place area on the set 2D plate. Heatmap is further down the same page: heat paints on that plate, with no Place, Browse, or Walk sample chips. Android install and usage sit under the overlay.

   • ●Scroll Floors: Place device stays on the main plate. Heatmap at the bottom uses the PDF or Make 2D drawing already set above.
   • ●The second Place bar under Heatmap is gone. wifi-heatmap stays checked. Second Floor plates were not redrawn. Password hashes untouched.
   • floors
   • heatmap
   • walk

Tuesday, September 22, 2026

1. this ship

   Floors legend includes AP and sits under the drawing

   The Floors drawing names the floor above the plate. Strong / Ok / Weak stay in a wrapping row under the drawing, with an AP pin that matches Place device. The floor name no longer covers the dots.

   • ●AP is the orange filled pin with a white stroke — same mark as Place device for access points. Not a slogan.
   • ●New 2D plates put FLOOR on a top caption band. Password hashes untouched.
   • floors
   • heatmap

Monday, September 21, 2026

1. this ship

   Walk blooms as you move — no Save tap per point

   Android Walk starts gathering dBm when you are paired. Steps plus heading place points on the uploaded plan. Color blooms on the Walk pad and Floors → Heatmap about every two seconds. NetLens-style live fill; we did not add ARCore.

   • ●Start walk after Pair. Tap the drawing once if the pin is in the wrong room. Pause walk if you need to stop.
   • ●Sideload Lantern.apk again (version 7) — native Walk changed. Site picture still updates in the WebView without that install.
   • ●wifi-heatmap stays checked. No LDAP bind. Password hashes untouched.
   • floors
   • heatmap
   • walk
   • android

2. this ship

   Heatmap sits on the uploaded floor drawing

   After a PDF is on the floor, Floors → Heatmap paints a continuous dBm field on that drawing — rooms stay visible. Walk taps the same plan. Not a vacant square or a generic grid. Harborline stays demo. Free testers keep samples on their org.

   • ●The site WebView in Lantern.apk refreshes this picture without a new install. Walk (RSSI, pairing, drawing pad) is compiled into the APK — sideload again only when that native shell changes.
   • ●Android pad 0–1 maps onto the plan. Typed Walk sample still uses the on-screen drawing.
   • ●wifi-heatmap stays checked. No LDAP bind. Password hashes untouched.
   • floors
   • heatmap
   • walk
   • android

3. this deploy

   Floor labels and walk dots no longer pile on the clip

   Floors / Heatmap was drawing the PDF clip, room titles, BSSID text, hover cards, and every walk sample on top of each other. One label per room, clustered walk dots, one hover card, and the site URL cropped out of the highlight.

   • ●A room named Room no longer prints Room Room. Clip photos keep their own labels; we do not paint a second title on top.
   • ●Walk samples that land in the same spot become one dot (blooms still show on Air / Heat). Hover is a single card above the map.
   • ●Highlight clips trim the lantern.enlightenstudios.us footer. Neighbor room plates that sit under a highlight stay hidden. Rail and OG unchanged.
   • floors
   • heatmap
   • walk

4. this ship

   Android heatmap is one APK, not a zip of files

   Floors → Heatmap now has Download Android heatmap (Lantern-walk.apk). Numbered steps: unknown sources, Open Lantern walk, walk the floor, upload. Kotlin source is Advanced. Free testers keep heatWalk on their own org.

   • ●Primary control is Download Android heatmap. Open Lantern walk pairs the phone. Not a folder of README / Kotlin / curl.
   • ●/guide Android heatmap walk matches those four steps. Harborline pictures stay labeled demo.
   • ●floor-rssi-android notes updated. Did not restamp UniFi 8-port. Password hashes untouched.
   • floors
   • heatmap
   • walk
   • android

Sunday, September 20, 2026

1. this deploy

   Android Install sits on Floors Heatmap

   Floors now has a Heatmap section. Install the Android walk companion at the top, then the walk-sample blooms sit under it. Empty floor tells a tech to install and walk. Not a Play Store listing. Harborline stays the compiled demo.

   • ●floor-rssi-android — /map Heatmap. Install first. Companion zip from /api/walk/agent. Typed Walk sample stays. This PWA never reads dBm.
   • ●Walk blooms are the samples already on the plant. A real building never gets a Tacoma overlay.
   • ●wifi-heatmap paint now lives on Floors as well as Air. Real-street samples stay first-building. Password hashes untouched.
   • floors
   • heatmap
   • walk
   • android

2. this ship

   Heatmap from walk samples is checked off

   wifi-heatmap closes at 100%. Occupied grid cells average RSSI; an empty floor stays blank. Harborline sample AP dots stay labeled. A real building never gets Tacoma heat. Did not invent a street walk. Native iPhone RSSI stays wifi-phone-rssi.

   • ●Floors and Air paint walk-heat cells from filed samples. Overlapping points average in the cell. Weak RSSI does not invent the next room.
   • ●Imported buildings skip Harborline AP blooms. Harborline orange dots stay labeled Sample AP.
   • ●Real-street samples are first-building. Password hashes untouched.
   • air
   • heatmap
   • walk
   • launch

Friday, September 18, 2026

1. this deploy

   Air heat is occupied walk cells, not a bleed into empty rooms

   Overlapping typed walk samples average in a 48px cell. Cells nobody walked stay blank. Weak RSSI no longer paints a wide circle into the next room as if it were surveyed.

   • ●wifi-heatmap — 90%. Five of six steps. Real-street samples stay first-building. Native iPhone dBm is wifi-phone-rssi.
   • ●Harborline sample AP dots stay so you can open an AP. They are not airtime circles.
   • ●A real / Cobus building never gets Tacoma heat. Password hashes untouched.
   • air
   • heatmap
   • walk

Wednesday, September 16, 2026

1. this deploy

   Air heatmap paints from walk samples

   Each typed RSSI point now blooms on Air. The side card shows count and average on that floor. Harborline still has the demo AP circles. A real building is samples only.

   • ●Stronger readings stay tight and green. Weaker readings spread and go amber or red.
   • ●You still type the meter. iPhone will not give RSSI in the browser this phase.
   • ●Electrical floor plan for drops stays Need to do — that is pins on the drawing, not this heat.
   • air
   • heatmap